Table of Contents
Advertisement
Configuration
February 2023
Figure 5-9: Configuration differences
The following example describes the comparison of a stored configuration file with a
configuration of a connected monitor.
Procedure
1. Start the configuration software and connect the computer to an active (powered
2. Create a new monitor within the project (File → New → Monitor).
3. Click the new monitor to select it (description becomes blue-colored).
4. For the selected monitor, open the configuration file that shall be compared with
5. Start the comparison (Tools → Configuration differences).
6. Click Close Report to exit the comparison function.
User
This menu contains all commands necessary for Login, Log-off, and for the user
administration.
78
on) monitor. The software detects the monitor, adds it to the project, and loads the
configuration to the computer.
the connected monitor (File → Open → Configuration).
The window of the comparison function opens and shows the result that can be
printed.
Operating Manual
MHM-97442
MHM-97442, Rev. 2.06
Advertisement
Table of Contents
