Table of Contents
Advertisement
Operating Manual
MHM-97442
Click Send to load configuration parameters to the monitor. Before the loading process
starts, a dialog opens to confirm the safety relevant parameters.
Initialize
Click Initialize to open the assistant for the monitor configuration (see
avoid creating a configuration completely new, a standard configuration can be loaded.
Adapt this standard configuration to the mechanical requirements and further
specifications for the measurements such as number of teeth and trigger thresholds.
1. Select one of the configuration options:
2. Click OK to confirm the choice.
3. A warning message appears before already existing configuration parameters are
MHM-97442, Rev. 2.06
with the "Default" configuration
•
The default configuration is loaded as a basis for further parameter settings.
•
with the configuration of another monitor
Chose another monitor from the list field to transfer its parameters to the new
monitor. If there is no further monitor available, this item is gray shaded.
•
with a saved configuration
Click Select configuration to open a file browser to open a stored configuration
file (file extension *.mcfg).
•
with a configuration from a project
Click Select project to open a file browser to open a stored project (file ex-
tension *.pcfg). With the following list field, select one configuration out of all
configurations in this project.
Figure 5-18: Monitor initialization
overwritten. (see
Figure
5-19). Confirm the safety request.
Configuration
February 2023
Figure
5-18). To
89
Advertisement
Table of Contents
