Table of Contents
Advertisement
Operating Manual
MHM-97442
Figure 5-7: Menu item Save...
A. Save single monitor configuration
B. Save project
Close
Click Close to exit the configuration software. Any unsaved changes are lost.
Settings
This menu contains the single menu item Communication. Click Communication to open
Communication settings (see
communication interfaces. This window shows all serial communication interfaces of the
computer. Generally, the configuration software continuously scans all detected COM
ports for connected monitors. Each interface can be configured individually. The possible
settings are described below.
MHM-97442, Rev. 2.06
Figure
5-8) for the configuration of the serial
Configuration
February 2023
75
Advertisement
Table of Contents
