Table of Contents
Advertisement
Caution
You can check Continue to use this disk when self-evaluation is failed. If you check it, the HDD
will be used continuously even when the S.M.A.R.T. detection is abnormal. It is risky to enable
the function. Check it with care.
12.16.2 Detect Bad Sector
You can detect the bad sector of HDD to check the status.
Steps
1. Go to Configuration → Storage → Storage Management → HDD Detection.
2. Click Bad Sector Detection.
3. Select HDD No.
4. Select Test Type.
5. Click Start Detect.
The system starts to detect the HDD bad sector. You can view the HDD status on the interface.
6. Optional: Click Pause to pause the detection. Click Restore to restore the detection.
7. View the HDD information including HDD capacity, block capacity, status, and number of errors.
Result
Judge whether to use the HDD any more according to the detection result. If there are too many
bad sectors, change the HDD in time.
12.17 Configure Analog Camera
For the device supporting analog camera connection, you can configure the number of channels to
reduce the disconnected channel information display (such as "NO VIDEO").
Steps
Note
The function is only applicable to the device supporting analog cameras connection.
1. Go to Configuration → System → Camera Management → Analog Camera.
2. Select Channel Mode.
3. Click Save.
Mobile Video Recorder User Manual
63
Advertisement
Table of Contents
