Activate Via Web Browser - LINOVISION MNVR7608 User Manual

● Ensure your computer and the device are in the same network segment.
Steps
1. Run the SADP software.
2. Check the device status from the device list, and select the inactive device.
Note
The SADP software supports activating devices in batch. Refer to the user manual of SADP
software for details.
3. Enter Password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
4. Confirm the password.
5. Click Activate.

2.1.4 Activate via Web Browser

You can activate the device via web browser.
Before You Start
Ensure your device and computer are in the same network segment.
Steps
1. Visit device IP address via web browser.
2. Enter Password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
3. Confirm password.
4. Click OK.
Mobile Video Recorder User Manual
3