Configure License Plate Recognition Parameters - LINOVISION MNVR7608 User Manual

5. Click Save.

9.1.2 Configure License Plate Recognition Parameters

You can set the license plate recognition parameters such as the direction and size to recognize
these features of the passing vehicle.
Steps
1. Go to Configuration → VCA → License Plate Recognition → LPR Parameters.
Figure 9-2 Configure License Plate Recognition Parameters
2. Set the parameters below.
License Plate Direction
You can enable the recognition of the front or rear license plate.
License Plate Size
You can enable the recognition of the small-sized or large-sized license plate.
Mobile Video Recorder User Manual
Figure 9-1 Configure License Plate Recognition Area
43