Table of Contents
Advertisement
alarm triggers recording at 10:00, and the pre-record time is set as 5 seconds, the device
starts to record at 9:59:55.
Post-record
The time you set to stop recording after the scheduled time or the event. For example, if an
alarm triggered recording ends at 11:00, and the post-record time is set as 5 seconds, the
device records until 11:00:05.
Expired Time
The record can be deleted automatically after the configured expired time. If you enter 0, the
record will not be deleted. The record will be overwritten automatically if overwritten
recording is enabled.
6. Configure recording schedule. Refer to "Configure Arming Schedule" for details.
7. Optional: Click Copy to to copy upper settings to other channel(s).
8. Click Save.
3.2.5 Configure Redundant Recording
Enabling redundant recording, which means saving the record files not only in the R/W HDD but
also in the redundant HDD, will effectively enhance the data safety and reliability.
Before You Start
● Install and format at least two HDDs.
● Configure the recording schedule.
Steps
1. Go to Configuration → Storage → Storage Management → HDD Management.
2. Optional: Check an HDD, and click Format to format it.
3. Check an HDD, and select Property as Redundancy.
4. Click Set to save the settings.
5. Enable redundant record.
1) Go to Configuration → Storage → Schedule Settings → Record Schedule.
2) Select Channel No.
3) Click Advanced.
4) Check Redundant Record.
5) Click OK.
6) Optional: Click Copy to to copy the same settings to other channels.
7) Click Save.
3.2.6 Configure Disaster Storage
The device will save videos in both storage media and mobile fireproof storage box to ensure data
Mobile Video Recorder User Manual
11
Advertisement
Table of Contents
