4.1 Network Connection
4.1.1 Dial
Set the dialing parameters if you want to connect the device to the network via dialing.
Before You Start
Install SIM card and connect 3G/4G antenna to your device.
Steps
1. Go to Configuration → Network → Basic Settings → 3G/4G.
2. Check Enable.
3. Click Dial Parameters.
4. Select Network Mode.
Automatic
The device will automatically switch to the strongest network.
Auto-Search and Auto-Switch
Network priority: 4G > 3G > 2G. The device will automatically connect network of high
priority.
3G
The device only connects 3G network.
4G
The device only connects 4G network.
5. Set dial parameters.
– To connect the device to private network, enter Access Number, User Name, Password, and
APN.
– To connect the device to general network, you do not need to set dial parameters.
Mobile Video Recorder User Manual
Chapter 4 Network
15