Detect Hdd; Check S.m.a.r.t. Information - LINOVISION MNVR7608 User Manual

have been connected.
Before You Start
Connect a peripheral device to your recorder via the RS-232 serial port.
Steps
1. Go to Configuration → System → System Settings → Serial Configuration.
2. Select COM port the peripheral device connects to.
3. Edit Baud Rate, Data Bit, Stop Bit, etc.
Note
The parameters should be same with those of the connected device.
4. Select Usage.
Console
Select it when you need to debug the recorder via RS-232 serial port. Connect a computer to
the recorder via the computer serial port. The recorder parameters can be configured by
using software such as Hyper Terminal. The serial port parameters must be the same as those
of the recorder when connecting to the computer serial port.
Transparent Channel
Connect a peripheral device directly to the recorder. The peripheral device will be controlled
remotely by the computer via the network and the protocol of the peripheral device. If the
alarm button is connected, select transparent channel.
5. Click Save.

12.16 Detect HDD

12.16.1 Check S.M.A.R.T. Information

The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for
HDD to detect and report on various indicators of reliability in the hopes of anticipating failures.
Steps
1. Go to Configuration → Storage → Storage Management → HDD Detection.
2. Click S.M.A.R.T. Detection.
3. Select HDD No.
4. Select Self-test Type.
5. Click Start Self-test.
6. View the S.M.A.R.T. information in the table.
Mobile Video Recorder User Manual
62