Table of Contents
Advertisement
Chapter 5 Live View and Configuration
5.1 Live View
5.1.1 Start/Stop Live View
Start/stop the live view of cameras.
Steps
1. Go to Live View.
2. Click
to select the window division mode and select a window.
3. Double click a camera in the camera list to display its live image in selected window. Or click
to start the live view of all cameras.
4. Stop live view.
– Double click the camera again to stop its live view.
– Click
to stop the live view of all cameras.
5.1.2 Select Window Division Mode
Live view window division modes are selectable.
Window Division Mode
Click
to select live view window division mode.
Paging
Click
/
to turn to previous/next page.
5.1.3 Select Live View Stream
The device supports main stream and sub-stream. Main stream is used for continuous recording
and sub-stream is used for network transmission.
Click
to select live view stream.
5.1.4 Manual Capture
Capture live view pictures and save them to your computer.
Steps
1. Go to Live View.
2. Start live view of a camera.
Mobile Video Recorder User Manual
24
Advertisement
Table of Contents
