Table of Contents
Advertisement
3. Select Alarm Type according to alarm device type.
4. Check Enable Alarm Input Handling.
5. Configure arming schedule. For detailed steps, refer to "Configure Arming Schedule".
6. Configure linkage method. For detailed steps, refer to "Configure Linkage Actions".
7. Optional: Click Copy to and select desired channel(s) to copy the above settings to other alarm
input(s).
8. Click Save.
10.5 Configure Alarm Output
If you want the recorder to link with the alarm output device to alarm when events occur, set
alarm output.
Before You Start
Connect an alarm device to your recorder via the alarm output cables.
Steps
1. Go to Configuration → Event → Basic Event → Alarm Output.
2. Select Alarm Output No. and enter Alarm Name.
3. Select Delay to set dwell time.
Alarm output will continue for the set time.
4. Configure arming schedule. For detailed steps, refer to "Configure Arming Schedule".
Mobile Video Recorder User Manual
Figure 10-2 Configure Alarm Output
53
Advertisement
Table of Contents
