Configure Face Picture Library - LINOVISION MNVR7608 User Manual

2. Select Channel No.
3. Set the parameters.
Similarity Threshold
Check Enable to enable driver's face picture comparison, and set the threshold. When the
similarity between the captured face picture and the face picture in the face picture library
exceeds the set threshold, alarm will be triggered.
Enable Face Attendance Check
Check it to detect whether the driver is at the driver's seat. Set Triggering Time. Then the
device will detect every set time.
Enable Driver Substitution Prompt
Check it and the device will trigger alarm when the driver is changed during the running time
of the device.
Enable Driver ID Exception
Check it and set Comparison Timeout. When the device detects that there is no driver during
the set time, alarm will be triggered.
Pause Recognition in High Speed
Check it and set High Speed. Then the face picture comparison will disable when the vehicle
speed exceeds the set value.
Enable Audio Warning
Check it to enable audio warning and set Constant Alarm Filter Interval. Then the device will
beep every set interval when the device has detected the events above.
4. Click Save.

9.2.2 Configure Face Picture Library

Manage Face Picture Library
You can add, edit, or delete the face picture library locally.
Steps
1. Go to Configuration → Face Picture Library.
2. Click to add a face picture library.
3. Enter Face Picture Library Name, Threshold, and Remarks. Click OK.
Mobile Video Recorder User Manual
45