Table of Contents
Advertisement
You can enable license plate recognition and face picture comparison.
Note
The channel to enable the license plate recognition cannot be the same with the channel to enable
face picture comparison.
9.1 License Plate Recognition
9.1.1 Enable License Plate Recognition
You can enable license plate recognition (LPR) and set the LPR region. When a vehicle appears in
the LPR region and the license plate is recognized, a picture will be captured and the license plate
information will be overlaid on the captured picture.
Steps
Note
Up to two channels are supported for license plate recognition simultaneously.
1. Go to Configuration → VCA → License Plate Recognition → License Plate Recognition.
2. Select Channel No.
3. Check Enable to enable LPR.
4. If the default LPR region and trigger line do not applicable to the actual scene, adjust the region
or line.
1) Place the cursor on the four corners of the region or the two ends of the line, hold the left
button of the mouse to adjust its size.
2) Select the region or line, and drag to adjust its position.
Note
You can lick Clear to clear the default region and line, and click Reset to generate the default
region and line, and then adjust its size or position.
Mobile Video Recorder User Manual
Chapter 9 Smart Configuration
42
Advertisement
Table of Contents
