3. Select LAN interface.
– Select Debug Interface to debug the device.
– Select Rear Interface to connect to IP cameras.
4. Enter IPv4 Address, IPv4 Subnet Mask, and IPv4 Default Gateway.
5. Optional: To access the device via extranet, configure DNS server IP address.
6. Click Save.
4.1.4 Configure Port
Go to Configuration → Network → Basic Settings → Port to set the following parameters.
HTTP Port
To access the device via web browser.
RTSP Port
To get stream.
Server Port
To access the device via client software.
4.1.5 Configure DDNS
If the external network is a dynamic IP address, you can use the Dynamic Domain Name Server
Mobile Video Recorder User Manual
Figure 4-2 Configure Local Network
18