Connect To Wi-Fi - LINOVISION MNVR7608 User Manual

Note
Contact the network operator to obtain the private network dial parameters.
6. Optional: For the special private network needing two sets of dialing parameters, click The
default load to set the other set of dialing parameters.
7. Click Save.
8. Optional: Click Wireless Dial-up Status to view dialing status.

4.1.2 Connect to Wi-Fi

Set Wi-Fi parameters if you want to connect the device to the network via Wi-Fi.
Steps
1. Go to Configuration → Network → Basic Settings → TCP/IP.
2. Click WLan 1.
3. Set WLAN parameters.
– Check DHCP to get the IPv4 parameters automatically. You can use SADP to get the device IP
address.
Mobile Video Recorder User Manual
Figure 4-1 Set Dial Parameters
16