Network Sharing; Share Network Via Wi-Fi Ap; Share Network Via Cable - LINOVISION MNVR7608 User Manual

4.3 Network Sharing

4.3.1 Share Network via Wi-Fi AP

The recorder can work as a wireless router. Other devices can access network via the recorder.
Steps
Caution
Wi-Fi AP and Wi-Fi cannot be enabled at the same time. Enabling one will disable the other
automatically.
1. Go to Configuration → Network → Advanced Settings → Wi-Fi AP.
2. Check Enable Wi-Fi AP, Enable AP Broadcast, and Enable WLAN HotSpot according to your
needs.
3. Configure the hotspot parameters.
1) Enter SSID (hotspot name).
2) Select Security Mode.
3) Enter IP Address and SubNet Mask.
Note
The IP address should be in different network segment with that of TCP/IP address.
4. Optional: Check Enable DHCP and enter Start IP Address and End IP Address.
5. Click Save.
Result
When the recorder connects to the network via dialing, the connected peripheral device can get
access to the network either.

4.3.2 Share Network via Cable

Connect a peripheral device to your recorder with a network cable. The peripheral device can
access the network after the recorder is successfully dialed to the network.
Before You Start
Configure the IP address, gateway, etc. of the peripheral device.
Steps
1. Go to Configuration → Network → Basic Settings → TCP/IP.
2. Click Lan.
3. Check Enable Network Share.
4. Configure the network parameters for the peripheral device.
Mobile Video Recorder User Manual
22