Table of Contents
Advertisement
Mobile Video Recorder User Manual
Chapter 8 Event Detection
Event detection is to analyze driver's behavior, including smoking, fatigue driving, phone call, etc.
The device will trigger warning when these behaviors are detected.
Note
Event detection is only supported by some models. The actual device prevails.
8.1 Configuration
8.1.1 Configure Smart Driving Behavior
One recorder supports analyzing the smart device driving behavior of one channel once.
Calibrate Camera Position
Calibrate network camera position before enabling driving behavior detection.
Before You Start
Add the network camera to your device.
Steps
1. Go to Configuration → VCA → Driving Behaviors → IPC Position Calibration.
2. Select Channel No.
3. Adjust the network camera position to make the driver face image appear in the red frame, and
the safety belt image appear above the yellow line.
Figure 8-1 Calibrate Camera Position
38
Advertisement
Table of Contents
