Link Driving Behavior Alarm - LINOVISION MNVR7608 User Manual

3. Select Channel No.
4. Select Search Type as Event Search.
5. Select Main Type as Driver's Exceptional Behavior.
6. Set other search conditions, and click Search.
7. Check the video(s) to be downloaded, and click Download to save to the local path.
View and Download Pictures
1. Go to Picture.
2. Select Channel No.
3. Select File Type as Driver's Exceptional Behavior.
4. Set other search conditions, and click Search.
5. Click Live View to view the picture.
6. Check the picture(s) to be downloaded, and click Download to save to the local path.

8.3 Link Driving Behavior Alarm

The device can trigger specific linkage method when the configured driving behavior is detected.
Before You Start
At least one of the following requirements should be met:
● The device supports smart event detection, and the driving behavior parameters have been
configured.
● The device supports connecting smart terminal, and the smart terminal has been connected and
parameters have been configured.
Steps
1. Go to Configuration → Event → Basic Event → Driving Behaviors.
2. Select Channel No. and Driving Behaviors.
Note
● If the device supports smart event detection, the selected channel should be the one enabled
smart event detection.
● If the device supports smart terminal connection, the selected channel should be the one
connected to the smart terminal.
3. Check Enable.
4. Configure arming schedule. For detailed steps, refer to "Configure Arming Schedule".
5. Configure linkage method. For detailed steps, refer to "Configure Linkage Actions".
6. Click Save.
Mobile Video Recorder User Manual
41