Table of Contents
Advertisement
protection is disabled.
● When the device power voltage is lower than the system threshold, the device will shut down
automatically, no matter what type of startup/shutdown mode you selected.
3. Select Auto Work Type as Halt Delay.
4. Select Delay Time.
5. Click Save.
6.3 Configure Satellite Positioning
The built-in GNSS module supports GPS (Global Positioning System), enabling device positioning
and speed limit alarm.
Before You Start
Install the positioning antenna.
Steps
1. Go to Configuration → Vehicle → Position Settings.
2. Click Location Configuration.
3. Select Position Module.
Built-in
Obtain data from the satellite positioning module built in the device.
Intelligent Display Terminal
Obtain data from display terminal.
4. Select Locating Module.
Mobile Video Recorder User Manual
Figure 6-1 Configure Satellite Positioning
30
Advertisement
Table of Contents
