Table of Contents
Advertisement
2. Select Channel No.
3. Check Enable Video Tampering.
4. Draw the video tampering area.
1) Click Draw Area.
2) In live view image, drag to draw the video tampering area.
3) Click Stop Drawing.
5. Set Sensitivity.
6. Configure arming schedule. For detailed steps, refer to "Configure Arming Schedule".
7. Configure linkage method. For detailed steps, refer to "Configure Linkage Actions".
8. Click Save.
10.4 Configure Alarm Input
If you want the recorder to connect to peripheral alarm input devices to realize linkage alarm, set
alarm input.
Before You Start
Connect an alarm device to your recorder via the alarm input cables.
Steps
1. Go to Configuration → Event → Basic Event → Alarm Input.
2. Select Alarm Input No. and enter Alarm Name.
Mobile Video Recorder User Manual
Figure 10-1 Configure Alarm Input
52
Advertisement
Table of Contents
