Table of Contents
Advertisement
7.2 Configure Audio Parameters
You can configure the audio encoding format.
Before You Start
The device supports embedded audio or peripheral audio device has been connected.
Steps
1. Go to Configuration → Video/Audio → Audio.
2. Select Intercom Audio Coding.
Note
The selected encoding format should be the same with that of the embedded audio or
peripheral audio device.
3. Click Save.
7.3 Configure Image Parameters
You can adjust the image parameters to get clear image.
Steps
1. Go to Configuration → Image → Display Settings.
2. Select Channel No.
3. Set image parameters.
Day/Night Switch
Auto-Switch
In auto mode, the day mode and night mode can switch automatically according to the
light condition of environment.
Scheduled Switch
In scheduled mode, you can set the time schedule for day/night/day and night. For
example, click Day and set the start and end time for the day mode. Then the time out of
the schedule is for the night mode.
Brightness
It refers to the max. brightness of the image.
Contrast
It refers to the contrast of the image. Set it to adjust the levels and permeability of the image.
Saturation
It refers to the colorfulness of the image color.
Sharpness
Mobile Video Recorder User Manual
35
Advertisement
Table of Contents
