Table of Contents
Advertisement
turning left/right, reversing, etc.
Before You Start
Connect the sensor-in interface to vehicle corresponding interface. For details, refer to Quick Start
Guide.
Steps
1. Go to Configuration → Vehicle → Sensor-In.
2. Check Enable.
Note
If sensor-in is disabled, you can configure it via alarm input. For example, for the recorder with
4-ch alarm inputs, according to the sequence of the parameters on the interface, braking
corresponds to No. 5 alarm input (A<‐5), turning left corresponds to No. 6 alarm input (A<‐6),
and so on. Refer to "Configure Alarm Input" for details.
3. Select Trigger Level and Pop Channel according to actual situation.
The image of selected channel will be displayed in full screen when sensor-in is triggered.
4. Click Save.
Mobile Video Recorder User Manual
33
Advertisement
Table of Contents
