Table of Contents
Advertisement
5. Optional: Click Manual Alarm to trigger alarm manually. Click Stop Alarm to stop manual alarm.
6. Optional: Click Copy to and select desired channel(s) to copy the above settings to other alarm
output(s).
7. Click Save.
10.6 Configure Exception Alarm
Configure alarms which are triggered by exceptions to take necessary actions in time.
Steps
1. Go to Configuration → Event → Basic Event → Exception.
2. Select Exception Type.
3. Configure linkage method. For detailed steps, refer to "Configure Linkage Actions".
4. Click Save.
10.7 Configure Arming Schedule
Steps
1. Drag in time line to draw an arming period.
2. Adjust the set arming period.
– Click a period and adjust its length.
– Click a period, enter start time and end time, and click Save.
– Click Delete All to delete all periods.
Note
Up to 8 time periods can be set for each day and each of the time periods cannot be
overlapped.
3. Optional: Click Copy to and select desired days to copy the above settings to other days.
4. Click Save.
10.8 Configure Linkage Actions
Check the linkage action(s) when events occur, and click Save.
Note
Linkage actions vary with event types.
Audible Warning
The device will trigger an audible beep when events occur.
Mobile Video Recorder User Manual
54
Advertisement
Table of Contents
