Linking Transitions Between Keyers; Linking The Next Transition Selection Buttons - Sony MVS-8000 User Manual

This confirms the selection, which is reflected in the status area.

Linking Transitions Between Keyers

1
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
2
In the <Link> group, press [Key Trans Link].
The Key Trans Link menu appears.
The status area shows the keyers for each M/E bank and the linked keyers.
3
Using any of the following methods, select the keyer to be the master.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
The selected keyer appears in reverse video.
4
In the <Key Select> group, select the keyer to be linked to the transition of
the master.
Notes
Linking does not apply to a transition carried out with the downstream key
control block.

Linking the Next Transition Selection Buttons

To the transition links between keyers, you can add a link for the next transition
selection buttons in the transition control block. The effect of this additional
link is such that if for example, two keyers (Key 2 and Key 3) are linked with
the master keyer (Key 1), pressing the [KEY1] next transition selection button
also selects the [KEY2] and [KEY3] buttons.
1
Set the transition links between keyers.
For details of the operation, see the previous section "Linking Transitions
Between Keyers."
Parameter Adjustment
Master Key Select keyer to be master
Overall Control Panel Settings (Config Menu)
Setting values
1 to 16
67