Control Of Variable Speed Pumps; Pentair Intelliflo Vsf And Intelliflo 3 - Pentair E-Box SOLEO Connect Installation And Operation Manual

Installation and Operation Guide Version E-Box SOLEO Connect - Installation
4.7

Control of variable speed pumps

4.7.1

PENTAIR IntelliFlo VSF and IntelliFlo 3

Info
Set the appropriate Speed 1 (Frost Free), Speed 2 (Eco), Speed 3 (Normal) and Speed 4
(Max) speeds on the Drive (black control box on the Intelliflo pump).
Not supplied: the control cable.
IntelliFlo PENTAIR Speed Adjustment
• Frost free: Outlet used to trigger filtration for a water temperature < +3°C (modifiable).
• Eco Speed: Speed used when no preselected event (see relevant menu) is active.
• Normal speed: Speed used for the purposes of a preselected event (see relevant menu).
• Maximum speed: Speed used for backwashing or "shock" treatment (24 h of filtration and
electrolyser).
Phase/Neutral power supply in the E-Box
Terminals 3 and 4
The Earth on the dedicated terminal block
46 / 64
IntelliFlo Control
Dedicated RS-485
Terminal Block
(+)/(-) in the
Speedeo Connect box
Ref. SB-CU-IMP-069EB / A - 12.05.2023