Pentair Vs2 And Vs2M; Other Variable Speed Pumps - Pentair E-Box SOLEO Connect Installation And Operation Manual

4.7.2

PENTAIR VS2 and VS2m

Info
Set the appropriate Speed 1 (Frost Free), Speed 2 (Eco), Speed 3 (Normal) and Speed 4
(Max) speeds on the Drive (black control box on the Intelliflo pump).
Not supplied: the control cable.
Setting speeds on PENTAIR VS2 and VS2m pump
• Frost free: Outlet used to trigger filtration for a water temperature < +3°C (modifiable).
• Eco Speed: Speed used when no preselected event (see relevant menu) is active.
• Normal speed: Speed used for the purposes of a preselected event (see relevant menu).
• Maximum speed: Speed used for backwashing or "shock" treatment (24 h of filtration and
electrolyser).
Control of dry contacts
Dedicated terminal block in the Speedeo Connect housing
4.7.3

Other variable speed pumps

Info
Refer to the manual for the pump used as well as the manual for the box SPEEDEO
Connect for the connection to the dedicated terminal block.
Not supplied: the control cable.
Adjusting Speeds on the Pump
• Frost free: Outlet used to trigger filtration for a water temperature < +3°C (modifiable).
• Eco Speed: Speed used when no preselected event (see relevant menu) is active.
• Normal speed: Speed used for the purposes of a preselected event (see relevant menu).
• Maximum speed: Speed used for backwashing or "shock" treatment (24 h of filtration and
electrolyser).
Ref. SB-CU-IMP-069EB / A - 12.05.2023
Installation and Operation Guide Version E-Box SOLEO Connect - Installation
47 / 64