Pentair E-Box SOLEO Connect Installation And Operation Manual page 40

Installation and Operation Guide Version E-Box SOLEO Connect - Installation
1. Unscrew the spigots.
Prohibition
Prohibition of pushing or pulling the cramps.
Risk of damage to probes.
2. Install the probes in the analysis chamber provided.
3. Connect the probes to the SOLEO, see Soleo Connections [
4. Do not lengthen the probe cables.
Info
Only the Pentair probes are compatible and guarantee the correct operation of the
device.
40 / 64
Screw/unscrew cylinders
Never push or pull the cylinders that have the cap
Ø10
→ Page 42].
Built-in flow sensor to be connected to input IN
(1 to 4) if desired or necessary.
Direction of water flow
Ref. SB-CU-IMP-069EB / A - 12.05.2023