Connection Of The Pool Automatic Shutter Power Supply (If Equipped) - Pentair E-Box SOLEO Connect Installation And Operation Manual

Installation and Operation Guide Version E-Box SOLEO Connect - Installation
4.5.5

Connection of the pool automatic shutter power supply (if equipped)

The connection of the supply phase, the neutral and the earth must be made through the
connection terminal block according to terminals 5 and 6 (for the earth connection: proceed to the
connection on the dedicated terminal block).
The electric consumption of the automatic shutter of the swimming pool must not exceed 16 A in
single phase.
This connection allows only the electrical supply of the swimming pool shutter and not its opening
or closing control.
If the shutter box is equipped with an "end of travel" contact, it can be connected to the terminal
block of the SPEEDEO Connect box on the terminal block IN 1 or IN 2 and set the function in the
SPEEDEO Connect.
Or
36 / 64 Ref. SB-CU-IMP-069EB / A - 12.05.2023