Installation Guide Linear Motors
12 EU Declaration of Conformity CE-Marking
NTI AG / LinMot ®
Bodenaeckerstrasse 2
8957 Spreitenbach
Switzerland
Tel.:
+41 (0)56 419 91 91
Fax:
+41 (0)56 419 91 92
declares under sole responsibility the compliance of the products:
•
Linear Motors of the Series PS10-70xxx-xx-xx
•
Linear Motors of the Series PS10-70xxx-xx-xx-D04
•
Linear Motors of the Series PS10-70xxx-xx-xx-D05
•
Linear Motors of the Series PS10-70xxx-xx-xx-D24
•
Linear Motors of the Series PS10-70xxx-xx-xx-D24S
•
Linear Motors of the Series PS10-70xxx-xx-xx-D25
•
Linear Motors of the Series PS10-70xxx-xx-xx-D25S
•
Linear Motors of the Series PS10-70xxx-xx-xx-D26
•
Linear Motors of the Series PS10-70xxx-xx-xx-D34
with the Low Voltage Directive 2014/35/EU 2014/35/EU.
Applied harmonized standards:
•
EN 61800-5-1: 2007
with the EMC Directive 2014/30/EU.
Applied harmonized standards:
•
EN 61000-6-2: 2005 (Immunity for industrial environments)
•
EN 61000-6-4: 2007 (Emission for industrial environments)
According to the EMC directive, the listed devices are not independently operable products.
Compliance of the directive requires the correct installation of the product, the observance of specific
installation guides and product documentation. This was tested on specific system configurations.
The safety instructions of the manuals are to be considered.
The product must be mounted and used in strict accordance with the installation instructions contained within
the installation guide, a copy of which may be obtained from NTI AG.
Company: NTI AG
Spreitenbach, 25.08.2023
Dr.-Ing. Ronald Rohner
CEO NTI AG
Page 42 / 44
P10-70-SSC / P10-70-SSC-Dxx
ENG
NTI AG / LinMot