Assembling Instruction - LinMot P10-70-SSC-D Series Installation Manual

Installation Guide Linear Motors

3.6.1 Assembling instruction

Please attend to the safety instructions in chapter 2 during the assembling!
If moving stator application is used, the minimum bending radius of the motor cable should
be adhered to. See chapter Cable, section Technical Data.
NTI AG / LinMot P10-70-SSC / P10-70-SSC-Dxx
Mount stator to its support bearing.
Placing a spacer.
Put a spacer (wood, plasic, aluminium with
thickness 15 mm) between slider and linear
guide. The spacer prevents injuries to the
hands and damage to the slider surface!
Insert slider into stator.
ENG
Page 11 / 44