Object Detect （Optional - Dahua 41HS-W-S2 Series User Manual

Click to delete the corresponding rule.
You can refer to the chapter 4.13.2.1 to set parameters.
4.13.2.3 Object Detect （Optional）

Please make sure you are connecting to the smart network camera, otherwise you can not
use IVS function!

For the same channel, the object detect and the intrusion can not be valid at the same time.
System generates an alarm when the object missing/abandoned object alarm occurs.
From main menu->Setting->Event->IVS->Object, the object interface is shown as below. See Figure
4-104.
Check the enable box to enable object detect function.
Click Rule setup to draw the rule.
Figure 4-104
Figure 4-105
238