Torque Values Mwg; Positioner; Operation Mode - AUMA PROFOX PF-M25(X) Manual

Device menu

4.1.1.4. Torque values MWG

4.1.1.5. Positioner

4.1.1.6. Operation mode

12
Table 4:
ID Indication
PRM_5538 End position OPEN value
PRM_5539 End position CLOSED value
PRM_5395 Hysteresis end positions
PRM_1954 Absolute position
PRM_1956 Relative position
PRM_709 Actual position
The indication correspond to the incremental values of the digital position sensor.
DIS_2249 Diagnostics
DIS_22 Detailed diagnostics
DIS_1033 Torque values MWG
The following states can be checked via diagnostics:
Table 5:
ID Indication
PZD_2077 Scaling 0.1 torque value OPEN (sync) in
Nm
PZD_2078 Scaling 0.1 torque value CLOSE (sync)
in Nm
DIS_2249 Diagnostics
DIS_22 Detailed diagnostics
DIS_613 Positioner
The following states can be checked via diagnostics:
Table 6:
ID Indication
PRM_84 Adaptive behaviour
PZD_1117 Setpoint
PZD_709 Actual position
PZD_659 Outer dead band
PZD_1030 Outer dead band OPEN
PZD_1031 Outer dead band CLOSE
PZD_1032 Inner dead band OPEN
PZD_1033 Inner dead band CLOSE
The menu is only visible if duty type monitoring (parameter PRM_2121 Duty type
monitoring) is activated. For enabling and activation of functions, refer to chapter
Application functions.
DIS_2249 Diagnostics
DIS_22 Detailed diagnostics
DIS_593 Operation mode
The following states can be checked:
Table 7:
ID Indication
PZD_488 On time
PZD_489 Number of motor starts/h
PROFOX actuators
Description
Value of end position OPEN
Value of end position CLOSED
End positions of hysteresis
Absolute position
Relative position
Actual position
Description
Scaling 0.1 torque value OPEN (sync) in Nm
Scaling 0.1 torque value CLOSE (sync) in Nm
Description
Setting the adaptive behaviour
Set setpoint position
Set actual position
Set outer dead band
Set outer dead band OPEN
Set outer dead band CLOSE
Set inner dead band OPEN
Set inner dead band CLOSE
Description
On time
Number of motor starts / h