Appendix C System Specifications - Supermicro 5130DB-IL User Manual

Table of Contents

Advertisement

Appendix C: System Specifications
Appendix C
System Specifications
Processors
Single Intel 6th/7th Gen Core i7/i5/i3, Pentium or Celeron in an LGA1151 type socket
Note: Please refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
Intel B250 Express chipset
BIOS
128 Mb AMI® Flash ROM
Memory
Four 288-pin DIMM slots that can support up to 64 GB of 72-bit unbuffered, non-ECC DDR4-2400 SDRAM
Note: See the memory section in Chapter 5 for details and our website for updates to supported memory.
SATA Controller
On-chip (Intel B250 Express) controller
Hard Drives
Two 5.25" external hot-swap drive bays
One 3.5" external drive bay
Three internal fixed 3.5" drive bays
One internal fixed 2.5" drive bay
PCI Expansion Slots
One M.2 PCIe 2.0 x2, M Key 2242/2280
One PCIe 3.0 x16 slot
One PCIe 3.0 x4 slot
One PCIe 3.0 x1 slot
Motherboard
C7B250-CB-ML; Micro ATX form factor (9.6 x 9.6 in. / 244 x 244 mm.)
Chassis
DS3A-261B; Mini Tower, 14.65 x 6.89 x 16.85 in. / 372 x 175 x 428 mm. (H x W x D)
System Cooling
One rear 8-cm fan
Power Supply
Model: PWS-261-PQ (80+ Bronze certified)
AC Input Voltages: 100-240 VAC
Rated Input Current: 6A (100v) to 3A (240v)
Rated Input Frequency: 50-60 Hz
Rated Output Power: 260W
Rated Output Voltages: +5V (18A), +12V1 (10A), +12V2 (12A), +3.3V (10A), -12V (0.8A), +5Vsb (2A)
Operating Environment
Operating Temperature: 5º to 35º C (41º to 95º F)
Non-operating Temperature: -40º to 70º C (-40º to 158º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
105

Advertisement

Table of Contents
loading

Table of Contents