Basic Procedure For Making Copies; Making Copies; Using The Automatic Document Feeder To Make Copies - Sharp MX-M266N Operation Manual

BASIC PROCEDURE FOR MAKING
COPIES
This section explains the basic procedures for making copies, including selection of the copy ratio and other copy
settings.

MAKING COPIES

USING THE AUTOMATIC DOCUMENT FEEDER TO
MAKE COPIES
This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder.
Indicator
line
1
Color Mode
Full Color
Exposure
Auto
2
Copy Ratio Original
100%
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
Special Modes
2-Sided Copy
Plain
Plain
8½x11
8½x11
Output
1. 8½x11
1. 8½x11
2. 8½x11R
2. 8½x11R
File
3.
8½x14
3. 8½x14
4. 11x17
4. 11x17
Quick File
Paper Select
Auto
Auto
8½x11
Preview
8½x11
Plain
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
Check the paper to be used.
Make sure that the desired paper (tray) is selected.
To change the paper (tray), touch the [Paper Select] key.
+
PAPER TRAYS (page 2-11)
2-12
COPIER
Contents