Maintenance Of The Engine - Norton clipper CS 352 Operating Instructions Manual

VERS.2022.10.20

6.2 Maintenance of the engine

Engine oil
Air cleaner filter
Fuel strainer cup
Spark plug
Fuel line
Engine oil
To change the oil,

Remove the oil filler cap/dipstick and
drain bolt.

Allow the oil to drain completely.

Dispose of used motor oil in a manner
that is compatible
environment. We suggest you to take
used oil in a sealed container to your
local recycling centre or service station
for reclamation. Do not throw it in the
trash, pour it on the ground or down in
a drain.

Reinstall the drain bolt, and tighten it to
18 N.m.

Fill the crankcase with the engine oil to
the outer edge of the oil filler neck.

Reinstall the filler cap/dipstick.
20
Regular service period
Perform at every indicated month or
operating hour interval, whichever comes
first
Check level
Change
Check
Clean
Clean
Check-Clean
Check (Replace if necessary)
with the
CS352_MAN_EN

Every 2 years