Maintenance And Servicing - Norton clipper CM 350 B Operating Instructions Manual

VERS. 2023.06.12

6 MAINTENANCE AND SERVICING

To ensure a long-term quality cutting, please follow the maintenance plan below:
Whole machine
Flange and blade fixing devices
Belts tension
Motor cooling fans
Water pump
Water pan
Water hoses and nozzles
Water pump filter
Cart guiding bars
Motor housing
Reachable nuts and screws
Maintenance of the machine
Always perform the maintenance of the machine with the battery disconnected.
Lubrification
Norton Clipper machines are equipped with lifetime lubricated bearings and ball bearings. It is
therefore unnecessary to grease or oil the machine.
Cleaning of the machine
Your machine will last longer if you clean it thoroughly after each day of work, especially water
pump, water pan (which can be removed for easy cleaning), motor and blade flange.
20
Visual control (general aspect,
watertightness)
Clean
Clean
Check and adjust
Clean
Clean
Clean
Clean
Clean
Clean
Clean
Tighten up
CM 350 B_MAN_EN