Maintenance Of The Engine - Norton clipper CS 502LV P13 Operating Instructions Manual

VERS.2022.09.11

6.2 Maintenance of the engine

Engine oil
Air Cleaner filter
Fuel strainer cup
Spark plug
Fuel line
Engine oil
To change the oil,

Remove the oil filler cap/dipstick and
drain bolt.

Allow the oil to drain completely.

Dispose of used motor oil in a manner
that is compatible
environment. We suggest you to take
used oil in a sealed container to your
local recycling centre or service station
for re-treatment. Do not throw it in the
trash, pour it on the ground or down in
a drain.

Reinstall the drain bolt, and tighten it
to 18 N.m.

Fill the crankcase with the engine oil to
the outer edge of the oil filler neck.

Reinstall the filler cap/dipstick.
Air Cleaner
CS 502LV has a dual type filter.
To service the air cleaner filter, remove
the blade and the water tank from the
machine, and drive the engine support in
its lowest position using the hand wheel.
Follow these instructions:

Remove the nut, air cleaner cover and
wing nut.
Regular service period
Perform at every indicated month or
operating hour interval, whichever comes
first
Check level
Change
Check
Clean
Clean
Check-Clean
Check (Replace if necessary)
with the
OIL DRAIN BOLT
CS 502LV P13_MAN_EN

Every 2 years
OIL DRAIN HOSE
OIL FILLER CAP/DISTICK
SEALING WASHER
« UPPER » LEVEL
21