Maintenance And Servicing - Norton clipper TR 231 GL Operating Instructions Manual

VERS. 2015.07.13

6 MAINTENANCE AND SERVICING

To ensure a long-term quality from the cutting with the TR 231, please follow the maintenance plan
below:
Whole machine
Flange and blade
devices
Motor cooling fans
Water pan
Motor housing
Reachable nuts and screws
Maintenance of the machine
Always perform the maintenance of the machine with the machine isolated from the electrical
supply.
Lubrication
The TR 231 uses life-lubricated bearings. Therefore, you don't need to lubricate the machine at all.
Cleaning of the machine
Your machine will last longer if you clean it thoroughly after each day of work, especially water
pump, water pan, motor and blade flanges.
Visual control
aspect, water tightness)
Clean
fixing Clean
Clean
Clean
Clean
Tighten up
(general
TR 231_MAN_EN
19