Maintenance And Service - Norton clipper CM 352 Operating Instructions Manual

VERS. 04.04.2019

6 MAINTENANCE AND SERVICE

To ensure a long-term quality from the cutting and a safe functioning of the machine without any problem,
please follow the maintenance plan below:
Whole machine
Flange and blade fixing devices
Motor cooling fans
Water pump
Conveyor cart
Water tray
Water hoses and nozzles
Water pump filter
Conveyor cart guiding bars
Motor housing
Reachable nuts and screws
Maintenance of the machine
Always perform the maintenance of the machine with the machine isolated from the electrical supply.
Lubrication
The CLIPPER machine use life-lubricated bearings. Therefore, you don't need to lubricate the machine at
all.
Cleaning of the machine
Your machine will last longer if you clean it thoroughly after each day of work, especially water pump, water
pan (which can be removed for easy cleaning), motor and blade flange.
Visual control
general aspect, water
tightness
Clean
Clean
Clean
Clean
Clean
Clean
Clean
Clean
Clean
Clean
Tighten up
MAN CM 352 EN
19