Maintenance And Servicing - Norton clipper TT 251 Operating Instructions Manual

VERS.2017.12.04

6. Maintenance and servicing

To ensure a long-term quality from the cutting with the TT251, please follow the maintenance plan
below:
Whole machine
Flange and blade fixing devices
Motor cooling fans
Water pan
Engine housing
Reachable nuts and screws
Maintenance of the machine
Always perform the maintenance of the machine with the machine isolated from the electrical
supply.
Lubrication
The TT251 uses life-lubricated bearings. Therefore, you don't need to lubricate the machine at all.
Cleaning of the machine
Your machine will last longer if you clean it thoroughly after each day of work, especially water pan,
motor and blade flange.
Visual control (general aspect,
watertightness)
Clean
Clean
Clean
Clean
Clean
Tighten up
TT251_MAN_EN
16