KYMCO BET & WIN 50 Manual page 88

7
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
Remove the drive belt from the clutch/
driven pulley.
DRIVE BELT INSTALLATION
Turn the driven pulley clockwise and lift it
up to expand the drive belt groove and then
install a new drive belt.
Set the drive belt on the drive pulley.
Install the drive pulley face, starting ratchet
and 17mm washer, then tighten the drive
face nut.
Torque: 34.3_ 39.2N-m
°Ø
When installing the drive face nut, make
sure that the tooth spaces of the drive
pulley face and starting ratchet align
with the teeth of the crankshaft.
7-7
www.PlanDeGraissage.org
Drive Belt
Drive Face Nut
Starting Ratchet
Bet & Win 50
Clutch/Driven Pulley
Drive Pulley Face
17mm Washer