KYMCO BET & WIN 50 Manual page 190

15
. ELECTRICAL EQUIPMENT
BET & WIN 50
STARTER RELAY INSPECTION
Open the front tool box and remove the bolt.
Remove the front tool box. (  2-4)
Disconnect the starter relay coupler and then
Starter Relay
remove the starter relay.
Connect the starter relay green/yellow
terminal to the 12V battery positive (+)
terminal and the relay yellow/red terminal to
the battery negative (-) terminal. Check for
Red
Yellow/Red
continuity between the starter relay red and
red/white terminals. The relay is normal if
there is continuity.
STARTER MOTOR REMOVAL
Green/Yellow
Red/White
Disconnect the starter motor cable.
Remove the two bolts attaching the starter
motor and remove the starter motor.
Bolts
The installation sequence is the reverse of
removal.
15-12
www.PlanDeGraissage.org