Crankshaft Inspection - KYMCO BET & WIN 50 Manual

10
. CRANKCASE/CRANKSHAFT
Remove the remaining bearing on the
crankshaft side using the universal bearing
puller.
°Ø
When separating the crankcase, the oil
seals must be removed. Replace the oil
seals with new ones.

CRANKSHAFT INSPECTION

Measure the connecting rod big end side
clearance.
Service Limit: 0.6mm replace if over
Measure the connecting rod big end radial
clearance at two points in the X and Y
directions.
Service Limit: 0.04mm replace if over
10-3
www.PlanDeGraissage.org
Universal Bearing Puller
BET & WIN 50