KYMCO BET & WIN 50 Manual page 74

6
. CYLINDER HEAD/CYLINDER/PISTON
COMBUSTION CHAMBER
DECABONIZING
Remove the carbon deposits from the
combustion chamber
°Ø
Avoid damaging the combustion
chamber wall and cylinder mating
surface.
CYLINDER HEAD INSPECTION
Check the cylinder head for warpage with a
straight edge and feeler gauge.
Service Limit: 0.10mm replace if over
CYLINDER HEAD INSTALLATION
Install the cylinder head on the cylinder
properly.
°Ø
Be careful not to damage the mating
surfaces.
Install a new cylinder head gasket onto the
cylinder.
6-3
www.PlanDeGraissage.org
BET & WIN 50
Combustion Chamber
Mating Surface
Cylinder head Gasket