KYMCO BET & WIN 50 Manual page 150

13
. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• Remove the motorcycle frame covers before removing the front wheel, steering handlebar, front
shock absorber and front fork. Jack the motorcycle front wheel off the ground and be careful to
prevent the motorcycle from falling down.
• During servicing, keep oil or grease off the brake pads and brake disk.
SPECIFICATIONS
Axle shaft runout
Front wheel rim runout
Front brake pad thickness
Front shock absorber spring free length
Brake disk thickness
Brake disk runout
Brake master cylinder I.D.
Brake master cylinder piston O.D.
Brake caliper piston O.D.
Brake caliper cylinder I.D.
TORQUE VALUES
Steering stem lock nut
Steering top cone race
Front shock absorber bolt
Front axle nut
Brake caliper bolt
SPECIAL TOOLS
Lock nut wrench
Front shock absorber compressor
Ball race remover
Driver handle
Outer driver
Bearing remover
Bearing remover head, 12mm
13-1
www.PlanDeGraissage.org
Item
Radial
Axial
78.4_ 117.6N-m
4.9_ 12.74N-m
19.6_ 24.5N-m
44.1_ 49.0N-m
24.5_ 34.3N-m
Standard (mm) Service Limit (mm)



4.0
221.5
3.8_ 4.2

11.0_ 11.043
10.957_ 10.970
25.335_ 25.368
25.400_ 25.45
BET & WIN 50
0.2
2.0
2.0
2.0
204.3
3.0
0.30
11.055
10.945
25.30
25.485