KYMCO BET & WIN 50 Manual page 10

1
. GENERAL INFORMATION
 Route harnesses so they are neither
pulled tight nor have excessive slack.
 Protect wires and harnesses with
electrical tape or tube if they contact a
sharp edge or corner.
 When rubber protecting cover is used to
protect the wire harnesses, it shall be
installed securely.
 Do not break the sheath of wire.
 If a wire or harness is with a broken
sheath, repair by wrapping it with
protective tape or replace it.
 When installing other parts, do not press
or squeeze the wires.
www.PlanDeGraissage.org
BET & WIN 50
Do not
pull too
tight!
Do not press or
squeeze the wire.
1-8