Transportation By Means Of Crane - ABB MNS R Installation Manual

The transportation on manual lift
truck is dangerous, the apparatus
can overturn. For this reason, the
distance between the crossbeams
or pallets and the bottom must not
exceed 3 mm (see Figure).
3.3.2

Transportation by Means of Crane

• For the transportation by means of a crane, the compartments and the related sending units must be
equipped with lifting angles.
• It is not allowed to fix the lifting devices to the frame sections.
• The angle between the lifting cable and the crane hook must not exceed 120° (see Figure).
• The lifting angles can be removed after the apparatus installation has been performed.
• The fastening holes for the lifting angles are to be plugged with plugs GMN 775 502 P18 caps.
11
1TTS900001M0902