IES-1000 User's Guide
LED
COLOR
SHDSL (1-8)
Green
or ADSL (1-8)
LAN
Green
Yellow
2.2.2
Front Panel Ports
The following tables describe front panel ports.
Table 2-2 Front Panel Ports of the SAM1008 Network Module
PORT
LAN
SHDSL 1-8
CONSOLE
Table 2-3 Front Panel Ports of the AAM1008 Network Module
PORT
LAN
ADSL 1-8 (upper)
ADSL 1-8 (lower)
CONSOLE
PORT
POWER
2-2
Table 2-1 Network Module LED Descriptions
STATUS
On
The DSL link is up.
Off
The DSL link is down.
Blinking
The system is transmitting/receiving to/from a 10 Mbps Ethernet
network.
On
The link to a 10 Mbps Ethernet network is up.
Off
The link to a 10 Mbps Ethernet network is down.
Blinking
The system is transmitting/receiving to/from a 100 Mbps Ethernet
network.
On
The link to a 100 Mbps Ethernet network is up.
Off
The link to a 100 Mbps Ethernet network is down.
The LAN port is a 10/100 Mbps auto-sensing Ethernet port that connects to a router.
These RJ-11 ports (labeled 1-8) connect to subscriber G.SHDSL equipment.
The CONSOLE port is an RJ-11 port used for configuring the IES-1000. This port
connects to a local computer.
The LAN port is a 10/100 Mbps auto-sensing Ethernet port that connects to a router.
These RJ-11 ports (labeled 1-8) connect to subscriber ADSL equipment.
These RJ-11 ports (labeled 1-8) connect to CO (central office) equipment.
The CONSOLE port is an RJ-11 port used for configuring the IES-1000. This port
connects to a local computer.
Table 2-4 Front Panel Ports of the IES-1000
The POWER port accepts power from the included power cord. Refer to section
1.2.4 for specifications.
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
Hardware Overview