ZyXEL Communications ZyXEL DMA 1000 User Manual page 56

IES-1000 User's Guide
Down/up stream Depth value
Total Transceiver Output Power
Current ATUR Information:
Country code 0
Provider Code 01020304
Capabilities:
g.dmt POTS overlap (Annex A)
The results contain the operating modes, interleave delay, parity byte assignment and parity bytes per codeword,
symbols per codeword and interleave depth. Current ATUR Information contains data acquired from the
ATUR (stands for ADSL Termination Unit – Remote, in this case the subscriber's ADSL modem or router)
during negotiation/provisioning message interchanges. It includes the Vendor ID and Version Number obtained
from Vendor ID fields (g.994.1) or R-MSGS1(T1.413) and country code from Vendor ID (g.994.1).
Information obtained prior to training to steady state transition will not be valid or will be old information. Annex
A refers to POTS.
7.5.8 Lineperf Command
Syntax:
192.168.1.1 adsl> lineperf <port number>
where
<port number> = A port number, from 1 to 8.
The lineperf command shows the line performance counters of an ADSL port.
An example is shown next.
192.168.1.1 adsl> lineperf 7
nfebe-I/nfebe-ni
ncrc-I/ncrc-ni
nfecc-I/nfecc-ni
nfec-I/nfec-ni
nblks-ds/nblks-us
nsec-ds/nsec-us
n-eb-ds/n-eb-us
n-bbe-ds/n-bbe-us
n-es-ds/n-es-us
n-ses-ds/n-ses-us
7-6
: 2/ 2
: 8dB
: 0/0
: 0/0
: 0/0
: 0/0
: 120878/120878
: 2060/2060
: 0/0
: 0/0
: 0/0
: 0/0
ADSL Commands