LABEL
Getting Started
General Setup
Bridge Setup
IP Setup
Port Setup
Advanced Applications
Static Route Setup
VLAN Setup
Advanced Management
SNMP
Logins
Maintenance
Statistics
Diagnostic
Using the Web Configurator
Figure 4-3 Web Configurator - Navigation Panel
Table 4-1 Navigation Panel Links
This link takes you to a screen where you can configure general information about
your device.
This link takes you to a screen where you can set up and configure your device's
bridging and filtering features.
This link takes you to a screen where you can configure your device's IP address
information.
This link takes you to a screen where you can configure settings for the individual
ports on your device.
This link takes you to a screen where you can configure static routes for the device.
This link takes you to a screen where you can configure VLANs for your device.
This link takes you to a screen where you can set up SNMP related parameters.
This link takes you to a screen where you can change your password.
This link takes you to a screen where you can perform firmware maintenance.
This link takes you to a screen where you can view statistical information about the
status of your device.
This link takes you to a screen where you can view error logs and test the DSL
connections.
Click Config Save to save your
changes to non-volatile memory.
DESCRIPTION
IES-1000 User's Guide
4-3